Mario's Arcade Page

Here are some pictures and info of my arcade games:

Three Stooges
Picture - KLOV Entry
This is a very rare game. From what I've read, only about 200 of these machines were ever made (in comparison, about 20,000 Pac-Mans were made). My machine is a fully original game. I've also got an extra set of original side-art, control panel overlay, and marquee that were purchased from someone who used to work at Mylstar (the original manufacturer), plus an extra set of ROMs.

Millipede
Picture - KLOV Entry
This game is fully working. When purchased, the front artwork had been painted over with green paint, and it had a big hole in it from a lock bar. The front artwork was unsalvagable, so I painted the front black. The control panel overlay was ripped up, too. I purchased a replacement overlay, but at the time I didn't know that it was a Willis reproduction overlay, and it didn't look the same. So I installed some black marble contact paper, and ended up liking the way it looks. This game has a Multipede kit installed to play both Millipede and Centipede.

Stun Runner
Picture - KLOV Entry
This was once a favorite game of mine, basically due to the graphics which were exceptional at the time of its original release. This game is the most popular with the kids as love to play sitdown games.

Captain America
Picture - KLOV Entry
This game wasn't working when purchased, but it didn't matter since I originally had plans to install MAME into it. And I did. Compare the original control panel to the new control panel (this is my first prototype; the final one will be recut and have a spinner and artwork installed). The original arcade monitor will be used with an ArcadeVGA card (this is a special video board that is used to drive arcade monitors). I haven't been working too much on this lately, so it's still not done. Hopefully soon!

Continental Circuit
Picture - KLOV Entry
This racing game isn't much fun; the game is very unforgiving of mistakes. I plan to install MAME in this machine and turn it into a racing-only game cabinet. I expect it would also be fun to play breakout-type games using a steering wheel.

Solitaire
Picture - KLOV Entry
I installed MAME onto this machine. The PC is an older model, so it's mostly only useful for the older games. I wanted a vertical monitor cab, so I have since pulled out the monitor and installed a PC monitor in the vertical position. It looks bad now because the artwork isn't aligned to the monitor. But I plan to install new artwork.

WWF Wrestlefest
Picture - KLOV Entry
This one is fully working. I just need a new monitor glass and to make some cosmetic fixes. I'm also thinking of taking the PCB from the Captain America game and putting it in here. If it works, I'll be able to switch between these 4-player games by simply swapping a few cables.

Pub Time Premier Darts
Picture
I purchased this game without the built-in monitor, header, board, and power supply; but I only paid $5. I picked up a board off of Ebay for $20. The power supply is from an old Atari ST computer (it is very small, has no fan and provides the needed voltages). The original boards had composite video output (which was intended to drive external TVs for use onsite during tournaments and such). It was simple to route this outside to a standard TV with video inputs. The TV was my mother's old TV which had tuner troubles. Someone was kind enough to contact me about a header, which I picked up for super-cheap. The header is not from a "Premiere" edition Pub Time, but it looks good anyways. I also replaced the "Player Change" button. Now, I'd like to find a monitor to fit inside the cabinet. Know of a 9" B&W monitor for cheap?

Pub Time Premier Darts
(Black)
Picture
I purchased this game from a local guy. He said that he had to cut off the header in order to get it to fit in his basement. And, of course, he didn't keep the header. Fortunately, it has everything else, including the monitor and keyboard, and is fully functional. Someday, I plan to build a new header for it. I already have a marquee (but not the "Premiere" version), and just need to build the housing and install a light.

Mini Spongebob
Picture
This is a game I built myself (with help from a friend). We started with the MiniMame plans, but mostly did our own thing. It's got a Jakks Spongebob game connected to an old composite video monitor. I originally intended to use real arcade controls connected to the game unit, but I later thought that the original game unit's Spongebob face would look nicer on the control panel and fit with the theme. I still need to make a marquee, and maybe add some more cosmetic touches. Here is an old pic of Angelo playing it to help show the scale of the machine.

Super Mario Bros. Pinball
Picture - IPDB Entry
I finally own the pinball game I've always wanted. I once saw this game at an auction and I loved the theme. I saw at most only 2 others over the years. The game is in great shape cosmetically except for some wear on the playfield near the ball return. The only problems are a few lights that are out, and one solenoid that is not firing. I'm hoping these are easy to fix.

Return to the D'Alessio home page.

Three Stooges Picture - KLOV Entry	This is a very rare game. From what I've read, only about 200 of these machines were ever made (in comparison, about 20,000 Pac-Mans were made). My machine is a fully original game. I've also got an extra set of original side-art, control panel overlay, and marquee that were purchased from someone who used to work at Mylstar (the original manufacturer), plus an extra set of ROMs.
Millipede Picture - KLOV Entry	This game is fully working. When purchased, the front artwork had been painted over with green paint, and it had a big hole in it from a lock bar. The front artwork was unsalvagable, so I painted the front black. The control panel overlay was ripped up, too. I purchased a replacement overlay, but at the time I didn't know that it was a Willis reproduction overlay, and it didn't look the same. So I installed some black marble contact paper, and ended up liking the way it looks. This game has a Multipede kit installed to play both Millipede and Centipede.
Stun Runner Picture - KLOV Entry	This was once a favorite game of mine, basically due to the graphics which were exceptional at the time of its original release. This game is the most popular with the kids as love to play sitdown games.
Captain America Picture - KLOV Entry	This game wasn't working when purchased, but it didn't matter since I originally had plans to install MAME into it. And I did. Compare the original control panel to the new control panel (this is my first prototype; the final one will be recut and have a spinner and artwork installed). The original arcade monitor will be used with an ArcadeVGA card (this is a special video board that is used to drive arcade monitors). I haven't been working too much on this lately, so it's still not done. Hopefully soon!
Continental Circuit Picture - KLOV Entry	This racing game isn't much fun; the game is very unforgiving of mistakes. I plan to install MAME in this machine and turn it into a racing-only game cabinet. I expect it would also be fun to play breakout-type games using a steering wheel.
Solitaire Picture - KLOV Entry	I installed MAME onto this machine. The PC is an older model, so it's mostly only useful for the older games. I wanted a vertical monitor cab, so I have since pulled out the monitor and installed a PC monitor in the vertical position. It looks bad now because the artwork isn't aligned to the monitor. But I plan to install new artwork.
WWF Wrestlefest Picture - KLOV Entry	This one is fully working. I just need a new monitor glass and to make some cosmetic fixes. I'm also thinking of taking the PCB from the Captain America game and putting it in here. If it works, I'll be able to switch between these 4-player games by simply swapping a few cables.
Pub Time Premier Darts Picture	I purchased this game without the built-in monitor, header, board, and power supply; but I only paid $5. I picked up a board off of Ebay for $20. The power supply is from an old Atari ST computer (it is very small, has no fan and provides the needed voltages). The original boards had composite video output (which was intended to drive external TVs for use onsite during tournaments and such). It was simple to route this outside to a standard TV with video inputs. The TV was my mother's old TV which had tuner troubles. Someone was kind enough to contact me about a header, which I picked up for super-cheap. The header is not from a "Premiere" edition Pub Time, but it looks good anyways. I also replaced the "Player Change" button. Now, I'd like to find a monitor to fit inside the cabinet. Know of a 9" B&W monitor for cheap?
Pub Time Premier Darts (Black) Picture	I purchased this game from a local guy. He said that he had to cut off the header in order to get it to fit in his basement. And, of course, he didn't keep the header. Fortunately, it has everything else, including the monitor and keyboard, and is fully functional. Someday, I plan to build a new header for it. I already have a marquee (but not the "Premiere" version), and just need to build the housing and install a light.
Mini Spongebob Picture	This is a game I built myself (with help from a friend). We started with the MiniMame plans, but mostly did our own thing. It's got a Jakks Spongebob game connected to an old composite video monitor. I originally intended to use real arcade controls connected to the game unit, but I later thought that the original game unit's Spongebob face would look nicer on the control panel and fit with the theme. I still need to make a marquee, and maybe add some more cosmetic touches. Here is an old pic of Angelo playing it to help show the scale of the machine.
Super Mario Bros. Pinball Picture - IPDB Entry	I finally own the pinball game I've always wanted. I once saw this game at an auction and I loved the theme. I saw at most only 2 others over the years. The game is in great shape cosmetically except for some wear on the playfield near the ball return. The only problems are a few lights that are out, and one solenoid that is not firing. I'm hoping these are easy to fix.